The QuickLink Control Panel enables the operator to select any of the available inputs and outputs of the unit and use them on the desired channel. Note that QuickLink TXs with a single output cannot have inputs configured independently.
Input device
Select the Input Device dropdown box to view the available inputs on the QuickLink TX.
SDI/HDMI/ANALOG - Decklink A/V inputs e.g. HDMI, SDI, XLR, AES (hardware dependent).
NDI Receiver - Use an available NDI stream as A/V input.
Screen Capture – Capture the TX desktop (note this would be more suitable for YouTube videos rather than documents).
Audio Only – Return audio only to the caller.
Input settings
Click on the Settings button to view a list of available setting options.
|
SETTING |
DESCRIPTION |
|
Set Name |
This setting allows for the renaming of inputs to allow personalisation of workflows. |
|
Input Format
|
Select desired input format. By default, this is Auto Detect and will automatically detect the connected video format. |
|
Max Return Resolution |
Select the maximum return resolution to return to the caller (hardware dependent).
|
|
Internal A/V Source |
Select A/V source when input device is set to the Decklink e.g. SDI for embedded SDI or SDI_XLR for SDI with analogue audio.
|
|
SD Aspect Ratio Scaling |
Select SD input as 16:9 Squeezed, 16:9 Letter Box or 4:3 Center Cut |
|
Audio Input |
Select audio input device. |
Output device
Choose an available output device.
None – No video output, audio device selectable.
SDI/HDMI/ANALOG – Decklink output.
NDI Renderer – Render output to NDI.
Output settings
Select the Output Device Settings button to view list of available setting options.
|
SETTING |
DESCRIPTION |
|
Set Name |
This setting allows for the renaming of inputs to allow personalisation of workflows. |
|
Output Video Format |
Select desired output format. By default, this is set to Same as Input. |
|
SD Aspect Ratio Scaling |
Select SD input as 16:9 Squeezed, 16:9 Letter Box or 4:3 Center Cut |
|
Output Audio Device |
Select the output audio device. By default, this will be set to the selected output device.
|