Input/Output selection  

The Quicklink Control Panel enables the operator to select any of the available inputs and outputs of the unit and use them on the desired channel. Note that Quicklink TXs with a single output cannot have inputs configured independently.

 

Input device  

Select the Input Device dropdown box to view the available inputs on the Quicklink TX. 

mceclip0.png

SDI/HDMI/ANALOG - Decklink A/V inputs e.g. HDMI, SDI, XLR, AES (hardware dependent).

NDI Receiver - Use an available NDI stream as A/V input.

Screen CaptureCapture the TX desktop (note this would be more suitable for YouTube videos rather than documents).

Audio OnlyReturn audio only to the caller.

 

Input settings  

Click on the Settings button to view a list of available setting options.

mceclip1.png

SETTING

DESCRIPTION

Set Name

This setting allows for the renaming of inputs to allow personalisation of workflows.

 

Input Format

 

Select desired input format. By default, this is Auto Detect and will automatically detect the connected video format.

Max Return Resolution

Select the maximum return resolution to return to the caller (hardware dependent).

 

Internal A/V Source

Select A/V source when input device is set to the Decklink e.g. SDI for embedded SDI or SDI_XLR for SDI with analogue audio.

 

SD Aspect Ratio Scaling

Select SD input as 16:9 Squeezed, 16:9 Letter Box or 4:3 Center Cut

Audio Input

Select audio input device.

 

Output device  

Choose an available output device.

mceclip2.png

NoneNo video output, audio device selectable.

SDI/HDMI/ANALOGDecklink output.

NDI RendererRender output to NDI.

 

Output settings  

Select the Output Device Settings button to view list of available setting options.

 

SETTING

DESCRIPTION

Set Name

This setting allows for the renaming of inputs to allow personalisation of workflows.

Output Video Format

Select desired output format. By default, this is set to Same as Input.

SD Aspect Ratio Scaling

Select SD input as 16:9 Squeezed, 16:9 Letter Box or 4:3 Center Cut

Output Audio Device

Select the output audio device. By default, this will be set to the selected output device.

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions?
Submit a request
Share it, if you like it.