Recording individual sources (ISO)

When using Cre8 it is possible to record individual sources in mov format. With this possibility, you can individually record callers, camera inputs and other sources, giving you complete freedom and flexibility in post-production.

Please note, as recordings are encoded using the NDI codec, an install of NDI Tools will be required on your edit workstation to allow decode of the mov file. Please download and install NDI Tools from the NDI.tv website.

To ISO record a source, select the source you would like to record, then click the Filters button to open source filters.

Once the Filters window is open, within the Effect Filters, click the effect-filter-plus-icon.png icon then select the Dedicated NDI™ output filter.

ISO-rec-ndifilter-labelled.png

Enter a friendly name for your Dedicated NDI™ output (e.g. Caller #1 ISO REC), then click OK.

ISO-rec-rename1-labelled.png

Once the Dedicated NDI™ output filter has been added, within the NDI name field, enter the same friendly name as above (i.e. Caller #1 ISO REC). Click Apply changes then Close.

ISo-rec-rename2-labelled.png

You are now ready to begin recording ISO recording your source. Right-click an NDI Recorder from the bottom of the Cre8 interface, then select the friendly NDI Name you have entered to assign your ISO recording to an NDI Recorder. When assigned, click the NDI Name (i.e. Caller #1 ISO REC) to begin recording.

Once recording has started, your ISO recording name will begin to flash, and a timer will display how long the recording has been running.

To stop the recording, simply press the flashing NDI Name. Before the recording stops, a prompt will pop up to confirm the stopping of recording. Select Yes.

Once recording has stopped, your source recording will be saved within Videos > NDISources in mov format.

Was this article helpful?
0 out of 0 found this helpful
Have more questions?
Submit a request
Share it, if you like it.