Adding elevation systems

In addition to PTZ control, you may also want to add further elevation control. This can be achieved using a motorised elevation column or system, such as Polecam.

Click the SETTINGS button in the Remote Studio interface to add an elevation system.

From the settings window, click the SETUP tab.

SETUP.png

Next, select the AUDIO tab.

ELEVATION.png

Click the plus icon to add an elevation column/system.

PLUS.png

Enter the IP address of the elevation device. From here you can also enter a friendly name for your system, which will appear as the label in the interface. This is useful if you have multiple elevation systems.

IP.png

You can also check the box if you want fast elevation speed. Leave this disabled if your preference is a slower elevation movement. Click SAVE once you're happy with your settings.

FAST.png

If you wish to add more elevation systems, please repeat the steps above.

Was this article helpful?
0 out of 0 found this helpful
Share it, if you like it.